Commercial work in 90605
- Storefront door locks: aluminum-frame glass door cylinders and deadlatches.
- Rekeying when staff change, so former employees' keys stop working.
- Keypad and keyless entry to replace physical keys for staff.
- Exit hardware: panic bars and closers adjusted so doors latch properly.
- Office, desk and cabinet locks.
The cost of lost keys at work
Every key that leaves with a former employee is a key you no longer control. A quick rekey of the affected doors is usually far cheaper than dealing with a problem later. Keyless entry goes a step further: you delete the code instead of chasing the key.
Doors that do not latch
A storefront door that does not close fully is an open door overnight. Most latching problems come from a closer that needs adjustment or a strike that has shifted. We check both before suggesting new hardware.
Lockouts at opening time
If you are locked out before opening, call us and tell us the door type and lock brand if you know them. Read our article on office lockouts for steps to take while you wait.
Closing up at night
A short end-of-day routine prevents most commercial lock problems. Walk every exterior door and check that it has latched fully, especially doors with closers and panic hardware, which can stop just short of the frame. Test that the deadbolt or deadlatch engages, and look for loose handles or a strike plate that has worked free.
Keep a simple key log: who holds which key, when it was issued and when it was returned. When someone leaves without returning a key, you will know exactly which doors are affected and can rekey only those cylinders. If the log is getting hard to manage, it may be time to move staff entrances to keypad entry, where a code can be deleted in seconds.
Questions from customers in 90605
How long does rekeying a small shop take?
A shop with a few exterior doors is usually done in one visit. Larger buildings may take longer, and we will give you an estimate on the phone.
Can you fix a door closer?
We adjust and replace standard door closers as part of getting a door to latch reliably.
Do keypad locks work without power?
Most standalone keypad locks run on batteries and include a key override. We explain battery changes when we install.